WattAge Thermalaire EP RTF Specifications download pdf (Page 7)

Visit our website at http://watt-age.globalhobby.com for information on other Wattage products

The covering material used on the Mini Thermalaire EP is real iron-on heat shrink covering material, not cheap "shelf

paper." Because of this, it is possible with heat and humidity changes that the covering on your airplane may wrinkle or

sag. This trait is inherent in all types of heat shrink material. To remove any wrinkles that might be visible you will need

to purchase, or borrow from a fellow modeler, a heat iron. If you need to purchase one, the Global Heat Sealing Iron

# 360900 is recommended.

Follow this simple procedure to remove the wrinkles:

❑ Plug in and turn on the sealing iron to the medium-high temperature setting. Allow the iron to heat up for approximately

5 - 7 minutes.

❑ After the iron has reached temperature, lightly apply the iron to the wrinkled section of the covering. Move the iron

slowly over the wrinkled section until the covering tightens and the wrinkles disappear. You will notice that the color of the

covering will darken when it is heated. When the covering cools back down, it will return to its normal color.

☞

If the color layer smears from any of the seams the temperature of the iron is too hot. Turn the temperature dial down

and wait about 5 minutes for the iron to adjust to the lower temperature. You can remove any excess color streaks using

a paper towel soaked with a small quantity of Acetone.

SECTION 5: A NOTE ABOUT COVERING

WARNING

We do not suggest storing your airplane in an extremely hot environment (like the back of your car in direct

sunlight) for any length of time. The extreme heat could cause the covering material to wrinkle or sag and

possibly damage the fragile components of the radio control system.

Wattage stocks a complete line of replacement parts for your Mini Thermalaire EP. Listed below are the replacement

parts that are available along with their respective part numbers for easy ordering convenience. We suggest ordering

directly from your local dealer. If your dealer does not stock Wattage products, you can order directly from us at the

address shown below:

SECTION 6: REPLACEMENT PARTS

Global Hobby Distributors

18480 Bandilier Circle

Fountain Valley CA 92728

Phone: (714) 963-0329 Fax: (714) 964-6236

Mini Thermalaire EP - Complete -------------------128422

Wing Set --------------------------------------------------150555

Wing Screw Set-----------------------------------------150556

Fuselage Set --------------------------------------------150557

Stabilizer Set --------------------------------------------150558

Hardware Set--------------------------------------------- 150559

Instruction Manual -------------------------------------- 150560

Decal Set -------------------------------------------------- 150561

Motor Screw Set----------------------------------------- 131360

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

WattAge Thermalaire EP RTF Specifications Page 7